Home / Guides / How to Sync Delay and Reverb to BPM

Guide3 min read

How to Sync Delay and Reverb to BPM

How to Sync Delay and Reverb to BPM

If your delay sounds out of step with the music, start by confirming the tempo with the free tapping BPM counter, then use the formulas below. This guide explains how to sync delay and reverb to BPM without guesswork, so echoes land on the beat and reverb tails sit naturally in the mix.

The core formula

For delay, the core formula is: quarter note ms = 60,000 / BPM. There are 60,000 milliseconds in a minute, and dividing by the tempo gives the length of one quarter note beat. All other note divisions are derived from that single value, which keeps your whole session consistent.

Worked example at 120 BPM

At 120 BPM, the calculation is 60,000 / 120 = 500 ms. A quarter note delay is therefore 500 ms. From there, the other common values follow by halving or doubling. A half note is 1,000 ms, an eighth note is 250 ms, and a sixteenth note is 125 ms. If you need exact values at another tempo, use the BPM to MS Calculator instead of estimating.

Dotted and triplet times

Dotted notes multiply the straight value by 1.5. At 120 BPM, a dotted quarter note is 500 x 1.5 = 750 ms, and a dotted eighth note is 250 x 1.5 = 375 ms. That dotted eighth delay is a classic choice for rhythmic guitar and synth parts, because it sits between the beats and creates movement without clutter.

Triplet notes multiply the straight value by 2/3. At 120 BPM, a quarter note triplet is 500 x 2/3 = about 333 ms, and an eighth note triplet is 250 x 2/3 = about 167 ms. Triplets are useful for swing feels and for delays that need to feel looser than a straight grid. Round triplet values to the nearest millisecond in your plugin, since a fraction of a millisecond will not be audible.

Vocal reverb pre-delay: the 1/64 and 1/32 rule

Pre-delay is the short gap between the dry vocal and the start of the reverb. A simple starting rule is to use a 1/64 note for a tight, upfront vocal, and a 1/32 note when you want a little more space and depth. At 120 BPM, a quarter note is 500 ms, so a 1/32 note is 500 / 8 = about 63 ms, and a 1/64 note is 500 / 16 = about 31 ms.

Start with 31 ms for a modern pop vocal that needs to stay clear, and try 63 ms for a ballad or a vocal that should feel larger. If the reverb still muddies the words, shorten the pre-delay or reduce the decay time before reaching for more processing. For general tempo checks, the BPM in Music Explained guide covers the same conversion in plain terms.

Practical tips

  • Sync the delay to the DAW tempo where possible, and use millisecond values only when the plugin cannot sync.
  • Use dotted eighth delays for rhythm, and straight quarter note delays for simple, spacious echoes.
  • Keep reverb decay in proportion to the tempo: faster songs usually need shorter tails.
  • Check the result in context. A delay that sounds perfect solo can still fight the vocal in a full mix.

Related guides

Share this guide:WhatsAppEmail

About the author: Umar

Owner of TappingBPM.com

Umar is a web developer who builds free rhythm tools for musicians.

He runs TappingBPM.com, where every tool works right in your browser — no sign-up and no data stored.